Category: Walls

Updates

10/10/2012

Just though I would throw some updates on here, things have been very busy since the last post. Just built and installed a tv mount for the Innovation Center. The interior design is industrial/innovative, so I used 2" sqaure tubing and 1/4" plate and went from floor to ceiling. supporting 30 lbs of tv.....no problem. Also, just finishing up privacy issues in an office for another commercial client. Black out flim on glass doors and installing verticle blinds in front of 9 foot tall windows, that should do the trick.
The entry wall in my house has been framed and drywalled, currently waiting for mud to dry so I can sand and apply the next coat. I'm thinking of putting marble on the floor for a grand entrance. Over the summer I have also installed some new windows and insulation and removed alot of plaster and lath.
A couple of large projects still in the works and I'm hoping these will come through to get us through the winter. Keep checking here or an FB or Pinterest, or LinkedIn for updates and project info and even pics.

0 Comments

Tip of the Week

16/4/2012

0 Comments

So you have finished laying you new hardwood floor in your living room and are now ready for baseboards. No big deal right? Where do you nail? To the floor or to the wall? Floors and walls expand and contract at different rates, so you want to make sure and nail to the wall. It's the same with quarter round or any other trim you are adding around your room. Keep your "new" room looking new and nails where they belong, hidden.

0 Comments

Contractors

3/12/2011

1 Comment

I have read a few articles on msn.com lately about contractors and home projects. These articles are good thought provokers and bring to light some good points, but maybe some that don't apply to your particular area, county, or city. Obviously if you are doing a home remodel project on a house you plan on selling, you want to make sure the project will add value to your home as well as functionality. If you don't plan on selling the home, then adding value may not be as important as funtionality or "want to". It's your decision and your home, take your time and make lists.
In these difficult times there may be some shady contractors or even fly-by-night guys out there. If you want quality work there is a price to be paid. Here's a good saying: "Cheap work isn't good and good work isn't cheap." Not always the case, but something to keep in mind. I know statistically the price of work has come down, but the price of material has not. So you might find the contractor cheaper, but expect to pay the same if not more for material. Many contractors out there are willing to discount their work just to get the job and there's nothing wrong with helping those in your community out. The things I would watch out for are guys you charge not only for material used on the job, but all the material they bought and maybe even contractors who charge by the hour. In remodeling you don't know what you are going to find behind drywall or plaster or under the floor or in the pipes until you get into it. There's nothing worse than under estimating and over paying. For me it's just easier to charge by the job and then however long it takes is on me. It also may be a good idea to check with your local Chamber of Commerce to see if the contractor is a member. The guys who invest in their community are the ones you can normally count on. Also, if something should happen to be wrong or go wrong after completion, a good contractor will come back and fix it at no cost.
There may be some unique situations also. If you know a contractor personally or have a good relationship with one, there may be times where some "experimentation" comes up. New systems or new materials may be introduced or maybe it's just gain some experience, the contractor may approach the home owner with this idea. I guess the home owner may approach the contractor with this idea, who knows it's a crazy world. If this situation does come up you ,the homeowner, could possibly get the work done for the price of materials. Just saying, if you don't mind being the guinea pig it might be a worth while venture.
All in all, remodeling and renovation don't have to be scary or bad projects. Make some lists, decide what you want and start asking questions. Contractors may not have all the answers and may have questions themselves. It's going to take time, life isn't a one hour tv show, it going to take some money, and there will be dust. Remember, the lowest bid isn't always the best and the job will only be as good as the material you are working with. Don't expect a million dollar bathroom for two thousand dollars. Happy remodeling!

1 Comment

Sunday

14/8/2011

0 Comments

It's one of those lazy Sunday afternoons and I decided to do some research. I'm looking at ways to build radiused wall (walls with curves) and completely new custom shower systems. Like all things, construction materials are getting lighter and more composite, in a shower situation this is good. Traditional materials are subject to water and mold in a wet environment, but the new systems are impervious to water, at least in theroy. The ease of use has also improved over time. The new shower systems now have a styrofoam cored board covered in a water proof membrane and these can be used on concrete walls, cinderblock, and even over studs. Then the tile is installed the same manner using thinset. This foam is even structure to the point that benches and seats can mbe made out of it and installed in the shower. No 2x4 studs or concrete board, just lightweight styrofoam. For those that like warm floors, manufacturers even make a floor warming system to be used in conjunction with this light tile backing material. Although, a fire rating has not been established by the manufacturer, so maybe putting this off is a good idea. How does a radiused wall come into play? The foam board can be cut in such a way that it can be bent around a radius and therefore making your custom shower design a reality. So far I like Kerdi board and Wedi products for shower systems. There are not any local distributors of these materials, but regional contacts. So, if you are looking to get a high end design with cutting edge construction technology, what are you waiting for? I have requested price lists and catalogs and I am looking far anyone who is wanting to experiment.....

0 Comments

Maintenance Agreements

2/6/2011

0 Comments

Property Serv does offer home and property maintenance agreements. These are set up so that you do not pay a monthly fee, we charge by the job! Why pay for something when you don't need it. This will give you peace of mind to know that all you have to do is pick up the phone and call. From maintaining the landscape to fixing broken pipes, we've got you covered. No more shopping around trying to find someone you can trust or has your best interest in mind. Property Serv is making Richmond and the surrounding communities a better place to live. Contact us to find out more!

0 Comments

Weatherization

3/1/2011

0 Comments

Well the new year is here, a time to start anew. If you are dealing with the same old problems, like drafts or cold spots or high heating bills, it's not to late to add some insulation or other weatherization products to remedy those issues. We haven't seen the coldest part of the season yet and the price of utilites doesn't seem to drop until May. So if you're concerned about the environment or your wallet, give us a call for a Free estimate and recommendations. A warmer, well insulated house definately saves the homeowner money, but also reduces the amount of fuel burned by the utility companies and is therefor better for the environment. Also, protect those pipes! Heat tape or pipe wrap is a good investment and a cheap alternative to replacing busted pipes. Feburary, which isn't that far off, is notorious for extreme cold and frozen/busted pipes. Set up an appointment today!

Remember if you are going to add insulation to your walls and your house was built prior to 1978, consult with a Certified Lead Renovator.

0 Comments

Updates

Tip of the Week

Contractors

Sunday

Maintenance Agreements

Weatherization

Author

Archives

Categories