|Property Serv LLC||
Tip of the Week
Caulking: Caulking can be a messy job that results in what looks like a 3 year old played arts and crafts with your house. Not to worry, here are a few tips to help you out. Around glass or a finished surface, use painters tape on either side of the joint being caulked. This will save you time on clean up and it's ok if the process gets a little messy, if caulk gets on the tape you can peel it right up. For the "professional" look, wet your finger and run it down the bead to smooth it out and remove the excess, this will also work if you want to use a putty knife. Just wet the knife and run it down the bead. Using a putty knife to tool the caulk or window glazing may take some practice. Part of the blade will need to follow a flat surace to keep things looking good, every movement made or bump the knife hits will show up in the caulk. Also be careful not to remove to much caulk or it will be ineffective. Follow the manufacturers recommendations for proper adhesion and sealing. Happy caulking.
Tip of the Week
So you have finished laying you new hardwood floor in your living room and are now ready for baseboards. No big deal right? Where do you nail? To the floor or to the wall? Floors and walls expand and contract at different rates, so you want to make sure and nail to the wall. It's the same with quarter round or any other trim you are adding around your room. Keep your "new" room looking new and nails where they belong, hidden.
Craig Jones, owner of Property Serv LLC. My goal is to better educate the homeowner and to make Richmond a better place to live.