Caulking: Caulking can be a messy job that results in what looks like a 3 year old played arts and crafts with your house. Not to worry, here are a few tips to help you out. Around glass or a finished surface, use painters tape on either side of the joint being caulked. This will save you time on clean up and it's ok if the process gets a little messy, if caulk gets on the tape you can peel it right up. For the "professional" look, wet your finger and run it down the bead to smooth it out and remove the excess, this will also work if you want to use a putty knife. Just wet the knife and run it down the bead. Using a putty knife to tool the caulk or window glazing may take some practice. Part of the blade will need to follow a flat surace to keep things looking good, every movement made or bump the knife hits will show up in the caulk. Also be careful not to remove to much caulk or it will be ineffective. Follow the manufacturers recommendations for proper adhesion and sealing. Happy caulking.
Mothers Day is this Sunday, if you have a project you want to complete or maybe you just want to surprise her by getting that "Honey Do" list out f the way. Call us this week and receive 20% off any services we provide. Work must start this week. Also, please enter your contact info at the bottom of the home page so we can keep track of who takes advantage of this deal. Let's show mom how much we care and that she is important enough to us to get things done!
Have you ever went to your local home improvement store for a counter top and just didn't like what they had in stock? Then the sales person wants you to special order something, but come to find out it's four times as much as the off the shelf stuff. Well, if you're not installing granite or some other natural stone or exotic product, why not fabricate your own. As most of you know, I'm renovating a house from 1890 (though there isn't anything from that time period that I have found) and I have put in new kitchen cabinets and flooring. All of the "stock" counter tops that I found had back splashes on them and to special order was about four times as much. So, I decided to fab my own. Nothing extravagant right now, just particleboard with a laminate covering. I'll add the back splash later (I'm going to use some of the split stone granite all the way across), the thing is it will be custom and the way I want it to look without having to spend hundreds and have to wait weeks on the factory. It's also good experience and a useful skill. Joining the pieces may prove a challenge (over 11 feet of base cabinets on one side), but I'm sure I have it figured out. I get pics up soon.
Craig Jones, owner of Property Serv LLC. My goal is to better educate the homeowner and to make Richmond a better place to live.